Reprius

1. Remove connection cover (2 bolts, 3 nuts) followed by main cover (6 bolts, 5 nuts)

2. Remove vent (one pop-it)

3. Remove interlock (1 bolt) Positive terminal and fuse at row 3

4. Remove terminal from fuse and disconnect the connector joining two blocks

5. Remove connector from negative terminal of relay block and sensor connector from row 1

6. Remove relay block (4 nuts, wideflange)

7. Remove relay block tray (1 bolt, 2 nuts)

8. Remove vent temperature sensor, remove vent (1 pop-it)

9. Remove connector on end cover, remove end cover (1 nut)

10. Remove connector from computer cover, remove computer cover (3 nuts)

11. Disconnect connection from computer, remove computer (3 nuts)

12. Disconnect connection joining the two blocks

13. Remove fuse block

14. Remove battery blocks (4 nuts each, wide-flange)

15. Remove bottom piece of computer case

Done